Ticket #288: timedout.txt

File timedout.txt, 4.8 KB (added by mythtv@…, 14 years ago)
Line 
12005-09-02 19:17:55.614 Recorder to started
22005-09-02 19:17:55.615 DVB#0 Rec: Adding pid 770 (0x302)
32005-09-02 19:17:55.618 DVB#0 Rec: Adding pid 772 (0x304)
42005-09-02 19:17:55.619 DVB#0 Rec: Adding pid 769 (0x301)
52005-09-02 19:17:55.643 DVB#0 Data read from DMX - This is for debugging with transform.c
62005-09-02 19:17:56.916 DVB#0 Rec: Found first keyframe
72005-09-02 19:17:56.919 DVB#0 Rec: Found Payload Start for PID 769
82005-09-02 19:17:56.941 DVB#0 Rec: Found Payload Start for PID 772
92005-09-02 19:17:56.943 DVB#0 Rec: Found Payload Start for PID 770
102005-09-02 19:17:59.645 Reschedule requested for id 1382.
112005-09-02 19:18:01.953 Scheduled 37 items in 2.3 = 0.30 match + 2.00 place
122005-09-02 19:18:01.961 DVB#1 Trying to tune to channel 13.
132005-09-02 19:18:02.057 Started recording "Everybody Loves Raymond" on channel: 1010 on cardid: 2, sourceid 1
142005-09-02 19:18:02.058 DVB#1 Frequency: 219500000 BW: 7MHz HP: 3/4 LP: 1/2C: QAM-64 TM: 8K H: None GI: 1/16
152005-09-02 19:18:02.061 DVBEvents: Flushing Event Status() frequency(226500000 Hz)
162005-09-02 19:18:02.062 DVBEvents: Flushing Event Status(Signal,Carrier,FEC Stable,Sync,Lock,) frequency(226500000 Hz)
172005-09-02 19:18:02.063 DVB#1 Waiting for event
182005-09-02 19:18:02.196 DVB#1 Event Status() frequency(219500000 Hz)
192005-09-02 19:18:02.199 DVB#1 Waiting for frontend event after tune.
202005-09-02 19:18:02.200 DVB#1 Frequency tuning successful.
212005-09-02 19:18:02.201 DVB#1 Tuned to frequency for channel 13.
222005-09-02 19:18:02.241 Changing from None to RecordingOnly
232005-09-02 19:18:02.256 Using profile 'Default' to record
242005-09-02 19:18:02.264 SetRecording(0x0x8229c68)
252005-09-02 19:18:02.270 Prog title: Everybody Loves Raymond
262005-09-02 19:18:02.277 SetSignalMonitoringRate(50, 0)
272005-09-02 19:18:02.284 SetupSignalMonitor()
282005-09-02 19:18:02.289 DVB#1 Opening DVB channel
292005-09-02 19:18:02.295 SetupSignalMonitor() -- DVB hack begin
302005-09-02 19:18:02.299 SetupSignalMonitor() -- DVB hack end
312005-09-02 19:18:02.379 SM:    AddFlags: Seen() Match() Wait(Sig,SNR,BER,UB,)
322005-09-02 19:18:02.381 DVBSM(1)::constructor(): initial flags 0x7400000
332005-09-02 19:18:02.382 signal monitor successfully created
342005-09-02 19:18:02.383 Setting up table monitoring.
352005-09-02 19:18:02.384 Not ATSC channel: major(-1) minor(-1).
362005-09-02 19:18:02.385 mpeg program number: 1586
372005-09-02 19:18:02.386 DTVSM(1)::SetProgramNumber(1586):
382005-09-02 19:18:02.387 SM: RemoveFlags: Seen(PMT,) Match(PMT,) Wait()
392005-09-02 19:18:02.388 SM:    AddFlags: Seen() Match() Wait(PMT,)
402005-09-02 19:18:02.389 SM:    AddFlags: Seen() Match() Wait(PAT,PMT,)
412005-09-02 19:18:02.391 Successfully set up MPEG table monitoring.
422005-09-02 19:18:02.392 SM(1)::Start: begin
432005-09-02 19:18:02.394 SM(1)::Start: end
442005-09-02 19:18:02.396 DTVSM(1)::GetStatusList: WaitForPMT seen(0) matching(0)
452005-09-02 19:18:05.411 SigMon Flags are: Seen() Match() Wait(PAT,PMT,Sig,SNR,BER,UB,)
462005-09-02 19:18:05.413 SML[0]: Name(slock) Val(0) thr(>=1) range(0,1) timeout(3000 ms) is set. Is NOT good.
472005-09-02 19:18:05.414 SML[1]: Name(signal) Val(32767) thr(>=-32768) range(-32768,32767) timeout(3000 ms) is set. Is good.
482005-09-02 19:18:05.416 SML[2]: Name(seen_pat) Val(0) thr(>=1) range(0,1) timeout(0 ms) is set. Is NOT good.
492005-09-02 19:18:05.416 SML[3]: Name(matching_pat) Val(0) thr(>=1) range(0,1) timeout(0 ms) is set. Is NOT good.
502005-09-02 19:18:05.417 SML[4]: Name(seen_pmt) Val(0) thr(>=1) range(0,1) timeout(0 ms) is set. Is NOT good.
512005-09-02 19:18:05.419 SML[5]: Name(matching_pmt) Val(0) thr(>=1) range(0,1) timeout(0 ms) is set. Is NOT good.
522005-09-02 19:18:05.419 SML[6]: Name(snr) Val(32767) thr(>=-32768) range(-32768,32767) timeout(0 ms) is set. Is good.
532005-09-02 19:18:05.421 SML[7]: Name(ber) Val(65535) thr(<=65535) range(0,65535) timeout(0 ms) is set. Is good.
542005-09-02 19:18:05.421 SML[8]: Name(ucb) Val(0) thr(<=65535) range(0,65535) timeout(0 ms) is set. Is good.
552005-09-02 19:18:05.422 TVRec: Timed out waiting for lock -- aborting recording
562005-09-02 19:18:05.424 SetSignalMonitoringRate(0, 0)
572005-09-02 19:18:05.424 TeardownSignalMonitor() -- begin
582005-09-02 19:18:05.425 DVBSM(1)::Stop: begin
592005-09-02 19:18:05.426 SM(1)::Stop: begin
602005-09-02 19:18:05.489 SM(1)::Stop: end
612005-09-02 19:18:05.491 DVBSM(1)::Stop: end
622005-09-02 19:18:05.493 DVBSM(1)::Stop: begin
632005-09-02 19:18:05.495 SM(1)::Stop: begin
642005-09-02 19:18:05.496 SM(1)::Stop: end
652005-09-02 19:18:05.497 DVBSM(1)::Stop: end
662005-09-02 19:18:05.498 SM(1)::Stop: begin
672005-09-02 19:18:05.500 SM(1)::Stop: end
682005-09-02 19:18:05.500 TeardownSignalMonitor() -- end
692005-09-02 19:18:05.502 TVRec: StartRecorderPost(): aborting recording
702005-09-02 19:18:05.503 StartRecorderPost()::closeRecorder -- begin
712005-09-02 19:18:05.506 StartRecorderPost()::closeRecorder -- end