Ticket #5728: dmesg

File dmesg, 25.0 KB (added by anonymous, 12 years ago)
Line 
1[    0.000000] Initializing cgroup subsys cpuset
2[    0.000000] Initializing cgroup subsys cpu
3[    0.000000] Linux version 2.6.24-19-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Aug 20 22:56:21 UTC 2008 (Ubuntu 2.6.24-19.41-generic)
4[    0.000000] BIOS-provided physical RAM map:
5[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
6[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
7[    0.000000]  BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
8[    0.000000]  BIOS-e820: 0000000000100000 - 000000005ff30000 (usable)
9[    0.000000]  BIOS-e820: 000000005ff30000 - 000000005ff40000 (ACPI data)
10[    0.000000]  BIOS-e820: 000000005ff40000 - 000000005fff0000 (ACPI NVS)
11[    0.000000]  BIOS-e820: 000000005fff0000 - 0000000060000000 (reserved)
12[    0.000000]  BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
13[    0.000000] 639MB HIGHMEM available.
14[    0.000000] 896MB LOWMEM available.
15[    0.000000] found SMP MP-table at 000ff780
16[    0.000000] Entering add_active_range(0, 0, 393008) 0 entries of 256 used
17[    0.000000] Zone PFN ranges:
18[    0.000000]   DMA             0 ->     4096
19[    0.000000]   Normal       4096 ->   229376
20[    0.000000]   HighMem    229376 ->   393008
21[    0.000000] Movable zone start PFN for each node
22[    0.000000] early_node_map[1] active PFN ranges
23[    0.000000]     0:        0 ->   393008
24[    0.000000] On node 0 totalpages: 393008
25[    0.000000]   DMA zone: 32 pages used for memmap
26[    0.000000]   DMA zone: 0 pages reserved
27[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
28[    0.000000]   Normal zone: 1760 pages used for memmap
29[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
30[    0.000000]   HighMem zone: 1278 pages used for memmap
31[    0.000000]   HighMem zone: 162354 pages, LIFO batch:31
32[    0.000000]   Movable zone: 0 pages used for memmap
33[    0.000000] DMI 2.3 present.
34[    0.000000] ACPI: RSDP signature @ 0xC00F9E60 checksum 0
35[    0.000000] ACPI: RSDP 000F9E60, 0021 (r2 ACPIAM)
36[    0.000000] ACPI: XSDT 5FF30100, 003C (r1 A M I  OEMXSDT   8000327 MSFT       97)
37[    0.000000] ACPI: FACP 5FF30290, 00F4 (r3 A M I  OEMFACP   8000327 MSFT       97)
38[    0.000000] ACPI: DSDT 5FF303F0, 380F (r1  P4CED P4CED090       90 INTL  2002026)
39[    0.000000] ACPI: FACS 5FF40000, 0040
40[    0.000000] ACPI: APIC 5FF30390, 005C (r1 A M I  OEMAPIC   8000327 MSFT       97)
41[    0.000000] ACPI: OEMB 5FF40040, 003F (r1 A M I  OEMBIOS   8000327 MSFT       97)
42[    0.000000] ACPI: PM-Timer IO Port: 0x808
43[    0.000000] ACPI: Local APIC address 0xfee00000
44[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
45[    0.000000] Processor #0 15:3 APIC version 20
46[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
47[    0.000000] Processor #1 15:3 APIC version 20
48[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
49[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
50[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
51[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
52[    0.000000] ACPI: IRQ0 used by override.
53[    0.000000] ACPI: IRQ2 used by override.
54[    0.000000] ACPI: IRQ9 used by override.
55[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
56[    0.000000] Using ACPI (MADT) for SMP configuration information
57[    0.000000] Allocating PCI resources starting at 70000000 (gap: 60000000:9fb80000)
58[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
59[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e8000
60[    0.000000] swsusp: Registered nosave memory region: 00000000000e8000 - 0000000000100000
61[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 389938
62[    0.000000] Kernel command line: root=UUID=4cb78b66-f749-446e-a379-2c9dc9bb0e1a ro quiet splash locale=nl_NL
63[    0.000000] mapped APIC to ffffb000 (fee00000)
64[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
65[    0.000000] Enabling fast FPU save and restore... done.
66[    0.000000] Enabling unmasked SIMD FPU exception support... done.
67[    0.000000] Initializing CPU#0
68[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
69[    0.000000] Detected 3006.855 MHz processor.
70[   43.048230] Console: colour VGA+ 80x25
71[   43.048234] console [tty0] enabled
72[   43.048651] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
73[   43.049059] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
74[   43.119324] Memory: 1545888k/1572032k available (2177k kernel code, 24996k reserved, 1006k data, 368k init, 654528k highmem)
75[   43.119334] virtual kernel memory layout:
76[   43.119335]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
77[   43.119336]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
78[   43.119337]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
79[   43.119338]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
80[   43.119339]       .init : 0xc0421000 - 0xc047d000   ( 368 kB)
81[   43.119340]       .data : 0xc03204c4 - 0xc041bdc4   (1006 kB)
82[   43.119341]       .text : 0xc0100000 - 0xc03204c4   (2177 kB)
83[   43.119344] Checking if this processor honours the WP bit even in supervisor mode... Ok.
84[   43.119386] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
85[   43.199282] Calibrating delay using timer specific routine.. 6018.61 BogoMIPS (lpj=12037220)
86[   43.199308] Security Framework initialized
87[   43.199315] SELinux:  Disabled at boot.
88[   43.199330] AppArmor: AppArmor initialized
89[   43.199334] Failure registering capabilities with primary security module.
90[   43.199343] Mount-cache hash table entries: 512
91[   43.199470] Initializing cgroup subsys ns
92[   43.199475] Initializing cgroup subsys cpuacct
93[   43.199488] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 00000000
94[   43.199497] monitor/mwait feature present.
95[   43.199499] using mwait in idle threads.
96[   43.199504] CPU: Trace cache: 12K uops, L1 D cache: 16K
97[   43.199506] CPU: L2 cache: 1024K
98[   43.199508] CPU: Physical Processor ID: 0
99[   43.199511] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b180 0000441d 00000000 00000000 00000000
100[   43.199522] Compat vDSO mapped to ffffe000.
101[   43.199538] Checking 'hlt' instruction... OK.
102[   43.215697] SMP alternatives: switching to UP code
103[   43.217569] Early unpacking initramfs... done
104[   43.527494] ACPI: Core revision 20070126
105[   43.527541] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
106[   43.529277] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
107[   43.529296] SMP alternatives: switching to SMP code
108[   43.530066] Booting processor 1/1 eip 3000
109[   43.540277] Initializing CPU#1
110[   43.618614] Calibrating delay using timer specific routine.. 6014.16 BogoMIPS (lpj=12028334)
111[   43.618625] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 00000000
112[   43.618633] monitor/mwait feature present.
113[   43.618638] CPU: Trace cache: 12K uops, L1 D cache: 16K
114[   43.618641] CPU: L2 cache: 1024K
115[   43.618643] CPU: Physical Processor ID: 0
116[   43.618646] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b180 0000441d 00000000 00000000 00000000
117[   43.619022] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
118[   43.619065] Total of 2 processors activated (12032.77 BogoMIPS).
119[   43.619193] ENABLING IO-APIC IRQs
120[   43.619365] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
121[   43.766522] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
122[   43.786506] Brought up 2 CPUs
123[   43.786532] CPU0 attaching sched-domain:
124[   43.786535]  domain 0: span 03
125[   43.786538]   groups: 01 02
126[   43.786541]   domain 1: span 03
127[   43.786543]    groups: 03
128[   43.786546] CPU1 attaching sched-domain:
129[   43.786547]  domain 0: span 03
130[   43.786549]   groups: 02 01
131[   43.786552]   domain 1: span 03
132[   43.786554]    groups: 03
133[   43.786823] net_namespace: 64 bytes
134[   43.786834] Booting paravirtualized kernel on bare hardware
135[   43.787388] Time: 15:32:17  Date: 09/20/08
136[   43.787413] NET: Registered protocol family 16
137[   43.787678] EISA bus registered
138[   43.787685] ACPI: bus type pci registered
139[   43.787847] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
140[   43.787850] PCI: Using configuration type 1
141[   43.787869] Setting up standard PCI resources
142[   43.799943] ACPI: EC: Look up EC in DSDT
143[   43.804621] ACPI: Interpreter enabled
144[   43.804625] ACPI: (supports S0 S1 S3 S4 S5)
145[   43.804644] ACPI: Using IOAPIC for interrupt routing
146[   43.810744] ACPI: PCI Root Bridge [PCI0] (0000:00)
147[   43.811258] Force enabled HPET at base address 0xfed00000
148[   43.811265] PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
149[   43.811269] PCI quirk: region 0480-04bf claimed by ICH4 GPIO
150[   43.812127] PCI: Transparent bridge - 0000:00:1e.0
151[   43.812156] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
152[   43.812272] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
153[   43.812451] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
154[   43.818852] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
155[   43.818957] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
156[   43.819061] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
157[   43.819164] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
158[   43.819267] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
159[   43.819369] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
160[   43.819472] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
161[   43.819574] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
162[   43.819716] Linux Plug and Play Support v0.97 (c) Adam Belay
163[   43.819767] pnp: PnP ACPI init
164[   43.819776] ACPI: bus type pnp registered
165[   43.822501] pnp: PnP ACPI: found 9 devices
166[   43.822505] ACPI: ACPI bus type pnp unregistered
167[   43.822511] PnPBIOS: Disabled by ACPI PNP
168[   43.822813] PCI: Using ACPI for IRQ routing
169[   43.822817] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
170[   43.842283] NET: Registered protocol family 8
171[   43.842286] NET: Registered protocol family 20
172[   43.842400] hpet clockevent registered
173[   43.842405] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
174[   43.842411] hpet0: 3 64-bit timers, 14318180 Hz
175[   43.843454] AppArmor: AppArmor Filesystem Enabled
176[   43.846267] Time: tsc clocksource has been installed.
177[   43.858301] system 00:05: ioport range 0x680-0x6ff has been reserved
178[   43.858305] system 00:05: ioport range 0x290-0x297 has been reserved
179[   43.858313] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
180[   43.858316] system 00:06: ioport range 0x800-0x87f has been reserved
181[   43.858318] system 00:06: ioport range 0x480-0x4bf has been reserved
182[   43.858321] system 00:06: iomem range 0xfed20000-0xfed8ffff has been reserved
183[   43.858325] system 00:06: iomem range 0xffb00000-0xffbfffff could not be reserved
184[   43.858331] system 00:07: iomem range 0xfec00000-0xfec00fff has been reserved
185[   43.858334] system 00:07: iomem range 0xfee00000-0xfee00fff has been reserved
186[   43.858340] system 00:08: iomem range 0x0-0x9ffff could not be reserved
187[   43.858343] system 00:08: iomem range 0xc0000-0xdffff could not be reserved
188[   43.858346] system 00:08: iomem range 0xe0000-0xfffff could not be reserved
189[   43.858349] system 00:08: iomem range 0x100000-0x5ffeffff could not be reserved
190[   43.858351] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
191[   43.888855] PCI: Bridge: 0000:00:01.0
192[   43.888857]   IO window: disabled.
193[   43.888862]   MEM window: fa800000-fe8fffff
194[   43.888866]   PREFETCH window: 9ff00000-bfefffff
195[   43.888871] PCI: Bridge: 0000:00:03.0
196[   43.888874]   IO window: c000-cfff
197[   43.888879]   MEM window: fe900000-fe9fffff
198[   43.888882]   PREFETCH window: disabled.
199[   43.888887] PCI: Bridge: 0000:00:1e.0
200[   43.888890]   IO window: d000-dfff
201[   43.888895]   MEM window: fea00000-feafffff
202[   43.888899]   PREFETCH window: disabled.
203[   43.888919] PCI: Setting latency timer of device 0000:00:1e.0 to 64
204[   43.888932] NET: Registered protocol family 2
205[   43.926219] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
206[   43.926534] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
207[   43.927112] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
208[   43.927481] TCP: Hash tables configured (established 131072 bind 65536)
209[   43.927484] TCP reno registered
210[   43.938300] checking if image is initramfs... it is
211[   44.341622] Switched to high resolution mode on CPU 1
212[   44.345475] Switched to high resolution mode on CPU 0
213[   44.550052] Freeing initrd memory: 7723k freed
214[   44.550722] audit: initializing netlink socket (disabled)
215[   44.550737] audit(1221924737.312:1): initialized
216[   44.550960] highmem bounce pool size: 64 pages
217[   44.553420] VFS: Disk quotas dquot_6.5.1
218[   44.553516] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
219[   44.553673] io scheduler noop registered
220[   44.553676] io scheduler anticipatory registered
221[   44.553678] io scheduler deadline registered
222[   44.553690] io scheduler cfq registered (default)
223[   44.553786] Boot video device is 0000:01:00.0
224[   44.554177] isapnp: Scanning for PnP cards...
225[   44.905556] isapnp: No Plug & Play device found
226[   44.942013] Real Time Clock Driver v1.12ac
227[   44.942126] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
228[   44.943577] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
229[   44.943657] input: Macintosh mouse button emulation as /devices/virtual/input/input0
230[   44.943843] PNP: No PS/2 controller found. Probing ports directly.
231[   44.946415] serio: i8042 KBD port at 0x60,0x64 irq 1
232[   44.946422] serio: i8042 AUX port at 0x60,0x64 irq 12
233[   44.964469] mice: PS/2 mouse device common for all mice
234[   44.964629] EISA: Probing bus 0 at eisa.0
235[   44.964667] EISA: Detected 0 cards.
236[   44.964671] cpuidle: using governor ladder
237[   44.964673] cpuidle: using governor menu
238[   44.964754] NET: Registered protocol family 1
239[   44.964783] Using IPI No-Shortcut mode
240[   44.964813] registered taskstats version 1
241[   44.964921]   Magic number: 8:589:538
242[   44.965036] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
243[   44.965037] EDD information not available.
244[   44.965264] Freeing unused kernel memory: 368k freed
245[   46.218008] fuse init (API version 7.9)
246[   46.415244] usbcore: registered new interface driver usbfs
247[   46.415278] usbcore: registered new interface driver hub
248[   46.425982] usbcore: registered new device driver usb
249[   46.428599] USB Universal Host Controller Interface driver v3.0
250[   46.428671] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
251[   46.428686] PCI: Setting latency timer of device 0000:00:1d.0 to 64
252[   46.428691] uhci_hcd 0000:00:1d.0: UHCI Host Controller
253[   46.429327] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
254[   46.429366] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000eec0
255[   46.429580] usb usb1: configuration #1 chosen from 1 choice
256[   46.429626] hub 1-0:1.0: USB hub found
257[   46.429637] hub 1-0:1.0: 2 ports detected
258[   46.529871] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
259[   46.529890] PCI: Setting latency timer of device 0000:00:1d.1 to 64
260[   46.529896] uhci_hcd 0000:00:1d.1: UHCI Host Controller
261[   46.529939] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
262[   46.529976] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ef00
263[   46.530151] usb usb2: configuration #1 chosen from 1 choice
264[   46.530191] hub 2-0:1.0: USB hub found
265[   46.530199] hub 2-0:1.0: 2 ports detected
266[   46.633722] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
267[   46.633739] PCI: Setting latency timer of device 0000:00:1d.2 to 64
268[   46.633745] uhci_hcd 0000:00:1d.2: UHCI Host Controller
269[   46.633782] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
270[   46.633811] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ef20
271[   46.633981] usb usb3: configuration #1 chosen from 1 choice
272[   46.634021] hub 3-0:1.0: USB hub found
273[   46.634030] hub 3-0:1.0: 2 ports detected
274[   46.737534] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
275[   46.737556] PCI: Setting latency timer of device 0000:00:1d.3 to 64
276[   46.737563] uhci_hcd 0000:00:1d.3: UHCI Host Controller
277[   46.737609] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
278[   46.737639] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ef40
279[   46.737821] usb usb4: configuration #1 chosen from 1 choice
280[   46.737862] hub 4-0:1.0: USB hub found
281[   46.737872] hub 4-0:1.0: 2 ports detected
282[   46.743860] SCSI subsystem initialized
283[   46.757413] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
284[   46.757419] Copyright (c) 1999-2006 Intel Corporation.
285[   46.769922] usb 1-1: new low speed USB device using uhci_hcd and address 2
286[   46.841412] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 18 (level, low) -> IRQ 18
287[   46.841430] PCI: Setting latency timer of device 0000:02:01.0 to 64
288[   46.860309] libata version 3.00 loaded.
289[   46.869718] 8139too Fast Ethernet driver 0.9.28
290[   46.946620] usb 1-1: configuration #1 chosen from 1 choice
291[   46.991789] e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:a6:55:05:89
292[   47.255680] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
293[   47.255749] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
294[   47.255767] PCI: Setting latency timer of device 0000:00:1d.7 to 64
295[   47.255773] ehci_hcd 0000:00:1d.7: EHCI Host Controller
296[   47.255816] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
297[   47.259739] ehci_hcd 0000:00:1d.7: debug port 1
298[   47.259752] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
299[   47.259772] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfebffc00
300[   47.272485] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
301[   47.272626] usb usb5: configuration #1 chosen from 1 choice
302[   47.272655] hub 5-0:1.0: USB hub found
303[   47.272662] hub 5-0:1.0: 8 ports detected
304[   47.348383] usb 1-1: USB disconnect, address 2
305[   47.376620] ACPI: PCI Interrupt 0000:03:0a.0[A] -> GSI 22 (level, low) -> IRQ 20
306[   47.377471] eth1: RealTek RTL8139 at 0xd400, 00:02:44:95:c7:b3, IRQ 20
307[   47.377475] eth1:  Identified 8139 chip type 'RTL-8100B/8139D'
308[   47.381226] ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 20 (level, low) -> IRQ 21
309[   47.434001] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21]  MMIO=[feaff800-feafffff]  Max Packet=[2048]  IR/IT contexts=[8/8]
310[   47.441065] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
311[   47.447608] sata_promise 0000:03:04.0: version 2.11
312[   47.447634] ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 23 (level, low) -> IRQ 19
313[   47.460257] scsi0 : sata_promise
314[   47.460355] scsi1 : sata_promise
315[   47.460436] scsi2 : sata_promise
316[   47.460488] ata1: SATA max UDMA/133 mmio m4096@0xfeafe000 port 0xfeafe200 irq 19
317[   47.460494] ata2: SATA max UDMA/133 mmio m4096@0xfeafe000 port 0xfeafe280 irq 19
318[   47.460498] ata3: PATA max UDMA/133 mmio m4096@0xfeafe000 port 0xfeafe300 irq 19
319[   47.660889] usbcore: registered new interface driver hiddev
320[   47.660926] usbcore: registered new interface driver usbhid
321[   47.660932] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
322[   47.775635] ata1: SATA link down (SStatus 0 SControl 300)
323[   48.083110] usb 1-1: new low speed USB device using uhci_hcd and address 3
324[   48.087106] ata2: SATA link down (SStatus 0 SControl 0)
325[   48.243345] ACPI: PCI Interrupt 0000:03:0d.2[B] -> GSI 22 (level, low) -> IRQ 20
326[   48.262210] usb 1-1: configuration #1 chosen from 1 choice
327[   48.279418] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input1
328[   48.293115] ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[20]  MMIO=[feafd800-feafdfff]  Max Packet=[2048]  IR/IT contexts=[4/8]
329[   48.293217] ata_piix 0000:00:1f.1: version 2.12
330[   48.293237] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
331[   48.293248] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
332[   48.293294] PCI: Setting latency timer of device 0000:00:1f.1 to 64
333[   48.294098] scsi3 : ata_piix
334[   48.295580] scsi4 : ata_piix
335[   48.297633] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
336[   48.297637] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
337[   48.311823] input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1
338[   48.343393] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.1/input/input2
339[   48.382662] input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1
340[   48.468313] ata4.01: ATA-7: Maxtor 6B300R0, BAH41B70, max UDMA/133
341[   48.468318] ata4.01: 586114704 sectors, multi 16: LBA48
342[   48.484188] ata4.01: configured for UDMA/100
343[   48.714192] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e01800005b4a66]
344[   48.802179] ata5.01: ATAPI: HL-DT-ST DVDRAM GSA-4165B, DL03, max UDMA/33
345[   48.973819] ata5.01: configured for UDMA/33
346[   48.973952] scsi 3:0:1:0: Direct-Access     ATA      Maxtor 6B300R0   BAH4 PQ: 0 ANSI: 5
347[   48.977687] scsi 4:0:1:0: CD-ROM            HL-DT-ST DVDRAM GSA-4165B DL03 PQ: 0 ANSI: 5
348[   48.990253] Driver 'sd' needs updating - please use bus_type methods
349[   48.990373] sd 3:0:1:0: [sda] 586114704 512-byte hardware sectors (300091 MB)
350[   48.990395] sd 3:0:1:0: [sda] Write Protect is off
351[   48.990399] sd 3:0:1:0: [sda] Mode Sense: 00 3a 00 00
352[   48.990430] sd 3:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
353[   48.990499] sd 3:0:1:0: [sda] 586114704 512-byte hardware sectors (300091 MB)
354[   48.990516] sd 3:0:1:0: [sda] Write Protect is off
355[   48.990520] sd 3:0:1:0: [sda] Mode Sense: 00 3a 00 00
356[   48.990557] sd 3:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
357[   48.990564]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
358[   49.011916]  sda1 sda2 < sda5 >
359[   49.032417] sd 3:0:1:0: [sda] Attached SCSI disk
360[   49.039033] sd 3:0:1:0: Attached scsi generic sg0 type 0
361[   49.039066] sr 4:0:1:0: Attached scsi generic sg1 type 5
362[   49.040251] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
363[   49.040258] Uniform CD-ROM driver Revision: 3.20
364[   49.040341] sr 4:0:1:0: Attached scsi CD-ROM sr0
365[   49.323605] Attempting manual resume
366[   49.323609] swsusp: Resume From Partition 8:5
367[   49.323611] PM: Checking swsusp image.
368[   49.323787] PM: Resume from disk failed.
369[   49.357883] kjournald starting.  Commit interval 5 seconds
370[   49.357891] EXT3-fs: mounted filesystem with ordered data mode.
371[   49.560764] ieee1394: Host added: ID:BUS[1-00:1023]  GUID[00023c00c100d0f0]
372[   55.479788] input: PC Speaker as /devices/platform/pcspkr/input/input3
373[   55.658371] Linux agpgart interface v0.102
374[   55.765269] agpgart: Detected an Intel i875 Chipset.
375[   55.776772] agpgart: AGP aperture is 256M @ 0xd0000000
376[   56.025773] EDAC MC: Ver: 2.1.0 Aug 20 2008
377[   56.197573] EDAC i82875p: i82875p init one
378[   56.198552] EDAC MC0: Giving out device to 'i82875p_edac' 'i82875p': DEV 0000:00:00.0
379[   56.198630] EDAC PCI0: Giving out device to module 'i82875p_edac' controller 'EDAC PCI controller': DEV '0000:00:00.0' (POLLED)
380[   56.275005] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
381[   56.345353] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
382[   56.438047] intel_rng: FWH not detected
383[   56.566027] iTCO_vendor_support: vendor-support=0
384[   56.621758] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
385[   56.621874] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
386[   56.621919] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
387[   56.658945] input: Power Button (FF) as /devices/virtual/input/input4
388[   56.681582] ACPI: Power Button (FF) [PWRF]
389[   56.681746] input: Power Button (CM) as /devices/virtual/input/input5
390[   56.697558] ACPI: Power Button (CM) [PWRB]
391[   58.452590] gameport: EMU10K1 is pci0000:03:0d.1/gameport0, io 0xdfe0, speed 1242kHz
392[   58.490291] nvidia: module license 'NVIDIA' taints kernel.
393[   59.060154] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
394[   59.060342] NVRM: loading NVIDIA UNIX x86 Kernel Module  169.12  Thu Feb 14 17:53:07 PST 2008
395[   59.486105] ACPI: PCI Interrupt 0000:03:0d.0[A] -> GSI 21 (level, low) -> IRQ 22
396[   59.489769] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/../../alsa-kernel/pci/emu10k1/emufx.c:1544: Installing spdif_bug patch: Audigy 2 EX [1005]
397[   60.687487] lp: driver loaded but no devices found
398[   60.754756] Adding 4546352k swap on /dev/sda5.  Priority:-1 extents:1 across:4546352k
399[   61.311336] EXT3 FS on sda1, internal journal
400[   61.451670] device-mapper: uevent: version 1.0.3
401[   61.451711] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
402[   63.584806] ip_tables: (C) 2000-2006 Netfilter Core Team
403[   65.269735] RPC: Registered udp transport module.
404[   65.269741] RPC: Registered tcp transport module.