Linux version 2.6.20-gentoo-r6 (root@server) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #2 SMP Fri Apr 20 23:40:27 CDT 2007 Command line: root=/dev/md3 vga=0x318 video=vesafb:mtrr:3,ywrap BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff30000 (usable) BIOS-e820: 000000001ff30000 - 000000001ff40000 (ACPI data) BIOS-e820: 000000001ff40000 - 000000001fff0000 (ACPI NVS) BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 130864) 1 entries of 3200 used end_pfn_map = 1048576 DMI 2.3 present. ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000fa850 ACPI: XSDT (v001 A M I OEMXSDT 0x06000517 MSFT 0x00000097) @ 0x000000001ff30100 ACPI: FADT (v003 A M I OEMFACP 0x06000517 MSFT 0x00000097) @ 0x000000001ff30290 ACPI: MADT (v001 A M I OEMAPIC 0x06000517 MSFT 0x00000097) @ 0x000000001ff30390 ACPI: OEMB (v001 A M I OEMBIOS 0x06000517 MSFT 0x00000097) @ 0x000000001ff40040 ACPI: DSDT (v001 SK8V_ SK8V_033 0x00000033 MSFT 0x0100000d) @ 0x0000000000000000 Scanning NUMA topology in Northbridge 24 Number of nodes 1 Node 0 MemBase 0000000000000000 Limit 000000001ff30000 Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 130864) 1 entries of 3200 used NUMA: Using 63 for the hash shift. Using node hash shift of 63 Bootmem setup node 0 0000000000000000-000000001ff30000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 130864 On node 0 totalpages: 130767 DMA zone: 56 pages used for memmap DMA zone: 1786 pages reserved DMA zone: 2157 pages, LIFO batch:0 DMA32 zone: 1733 pages used for memmap DMA32 zone: 125035 pages, LIFO batch:31 Normal zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Nosave address range: 000000000009f000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 00000000000e4000 Nosave address range: 00000000000e4000 - 0000000000100000 Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000) PERCPU: Allocating 33280 bytes of per cpu data Built 1 zonelists. Total pages: 127192 Kernel command line: root=/dev/md3 vga=0x318 video=vesafb:mtrr:3,ywrap Initializing CPU#0 PID hash table entries: 2048 (order: 11, 16384 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Checking aperture... CPU 0: aperture @ e8000000 size 128 MB Memory: 507904k/523456k available (3986k kernel code, 15164k reserved, 1996k data, 368k init) Calibrating delay using timer specific routine.. 3609.00 BogoMIPS (lpj=7218001) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0/0 -> Node 0 SMP alternatives: switching to UP code Freeing SMP alternatives: 40k freed ACPI: Core revision 20060707 Using local APIC timer interrupts. result 12516464 Detected 12.516 MHz APIC timer. Brought up 1 CPUs testing NMI watchdog ... OK. time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. time.c: Detected 1802.370 MHz processor. NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) 0000:00:0f.1: cannot adjust BAR0 (not I/O) 0000:00:0f.1: cannot adjust BAR1 (not I/O) 0000:00:0f.1: cannot adjust BAR2 (not I/O) 0000:00:0f.1: cannot adjust BAR3 (not I/O) PCI: enabled onboard AC97/MC97 devices Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. SCSI subsystem initialized libata version 2.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 0 of device 0000:00:00.0 agpgart: Detected AGP bridge 0 agpgart: AGP aperture is 128M @ 0xe8000000 ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[fdb00000-fdb007ff] Max Packet=[2048] IR/IT contexts=[4/8] PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: f5300000-f74fffff PREFETCH window: d5200000-e51fffff PCI: Setting latency timer of device 0000:00:01.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 3, 32768 bytes) TCP established hash table entries: 16384 (order: 6, 262144 bytes) TCP bind hash table entries: 8192 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered Total HugeTLB memory allocated, 0 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.28 [Flags: R/O]. SGI XFS with large block/inode numbers, no debug enabled io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones vesafb: framebuffer at 0xd8000000, mapped to 0xffffc20000100000, using 6144k, total 131072k vesafb: mode is 1024x768x32, linelength=4096, pages=1 vesafb: scrolling: redraw vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input1 ACPI: Power Button (CM) [PWRB] input: Sleep Button (CM) as /class/input/input2 ACPI: Sleep Button (CM) [SLPB] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 17 skge 1.9 addr 0xfde00000 irq 17 chip Yukon rev 1 skge eth0: addr 00:11:2f:4f:51:71 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky netconsole: not configured, aborting Linux video capture interface: v2.00 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:0f.1 ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: TOSHIBA DVD-ROM SD-M1912, ATAPI CD/DVD-ROM drive ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800008bb839] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... hda: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006) megasas: 00.00.03.05 Mon Oct 02 11:21:32 PDT 2006 sata_promise 0000:00:08.0: version 1.05 ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 18 (level, low) -> IRQ 18 sata_promise PATA port found Losing some ticks... checking if CPU frequency changed. ata1: SATA max UDMA/133 cmd 0xFFFFC2000004A200 ctl 0xFFFFC2000004A238 bmdma 0x0 irq 18 ata2: SATA max UDMA/133 cmd 0xFFFFC2000004A280 ctl 0xFFFFC2000004A2B8 bmdma 0x0 irq 18 ata3: PATA max UDMA/133 cmd 0xFFFFC2000004A300 ctl 0xFFFFC2000004A338 bmdma 0x0 irq 18 scsi0 : sata_promise ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7, max UDMA/133, 781422768 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 0 ata1.00: configured for UDMA/133 scsi1 : sata_promise ata2: SATA link down (SStatus 0 SControl 300) scsi2 : sata_promise scsi 0:0:0:0: Direct-Access ATA WDC WD4000KD-00N 01.0 PQ: 0 ANSI: 5 SCSI device sda: 781422768 512-byte hdwr sectors (400088 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 781422768 512-byte hdwr sectors (400088 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: Attached scsi disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 sata_via 0000:00:0f.0: version 2.0 ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20 sata_via 0000:00:0f.0: routed to hard irq line 10 ata4: SATA max UDMA/133 cmd 0xE800 ctl 0xE402 bmdma 0xD400 irq 20 ata5: SATA max UDMA/133 cmd 0xE000 ctl 0xD802 bmdma 0xD408 irq 20 scsi3 : sata_via ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ATA: abnormal status 0x7F on port 0xE807 ATA: abnormal status 0x7F on port 0xE807 ata4.00: ATA-6, max UDMA/133, 72303840 sectors: LBA48 ata4.00: ata4: dev 0 multi count 16 ata4.00: applying bridge limits ata4.00: configured for UDMA/100 scsi4 : sata_via ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ATA: abnormal status 0x7F on port 0xE007 ATA: abnormal status 0x7F on port 0xE007 ata5.00: ATA-6, max UDMA/133, 72303840 sectors: LBA48 ata5.00: ata5: dev 0 multi count 16 ata5.00: applying bridge limits ata5.00: configured for UDMA/100 scsi 3:0:0:0: Direct-Access ATA WDC WD360GD-00FN 35.0 PQ: 0 ANSI: 5 SCSI device sdb: 72303840 512-byte hdwr sectors (37020 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdb: 72303840 512-byte hdwr sectors (37020 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 > sd 3:0:0:0: Attached scsi disk sdb sd 3:0:0:0: Attached scsi generic sg1 type 0 scsi 4:0:0:0: Direct-Access ATA WDC WD360GD-00FN 35.0 PQ: 0 ANSI: 5 SCSI device sdc: 72303840 512-byte hdwr sectors (37020 MB) sdc: Write Protect is off sdc: Mode Sense: 00 3a 00 00 SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdc: 72303840 512-byte hdwr sectors (37020 MB) sdc: Write Protect is off sdc: Mode Sense: 00 3a 00 00 SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 > sd 4:0:0:0: Attached scsi disk sdc sd 4:0:0:0: Attached scsi generic sg2 type 0 Fusion MPT base driver 3.04.03 Copyright (c) 1999-2007 LSI Logic Corporation Fusion MPT SPI Host driver 3.04.03 Fusion MPT SAS Host driver 3.04.03 ieee1394: raw1394: /dev/raw1394 device initialized ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.4: irq 21, io mem 0xfdf00000 ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: irq 21, io base 0x0000b400 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: irq 21, io base 0x0000b800 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:10.3: irq 21, io base 0x0000c400 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 4-2: new low speed USB device using uhci_hcd and address 2 usb 4-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /class/input/input3 input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:10.2-2 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input4 md: raid1 personality registered for level 1 md: multipath personality registered for level -4 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC). ALSA device list: No soundcards found. oprofile: using NMI interrupt. Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (2044 buckets, 16352 max) ip_tables: (C) 2000-2006 Netfilter Core Team arp_tables: (C) 2002 David S. Miller TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 Bridge firewalling registered powernow-k8: Found 1 AMD Opteron(tm) Processor 144 processors (version 2.00.00) powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x2 powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0xe md: Autodetecting RAID arrays. md: autorun ... md: considering sdc5 ... md: adding sdc5 ... md: sdc3 has different UUID to sdc5 md: sdc2 has different UUID to sdc5 md: sdc1 has different UUID to sdc5 md: adding sdb5 ... md: sdb3 has different UUID to sdc5 md: sdb2 has different UUID to sdc5 md: sdb1 has different UUID to sdc5 md: created md3 md: bind md: bind md: running: raid1: raid set md3 active with 2 out of 2 mirrors md3: bitmap initialized from disk: read 8/8 pages, set 26 bits, status: 0 created bitmap (127 pages) for device md3 md: considering sdc3 ... md: adding sdc3 ... md: sdc2 has different UUID to sdc3 md: sdc1 has different UUID to sdc3 md: adding sdb3 ... md: sdb2 has different UUID to sdc3 md: sdb1 has different UUID to sdc3 md: created md2 md: bind md: bind md: running: raid1: raid set md2 active with 2 out of 2 mirrors md2: bitmap initialized from disk: read 15/15 pages, set 0 bits, status: 0 created bitmap (239 pages) for device md2 md: considering sdc2 ... md: adding sdc2 ... md: sdc1 has different UUID to sdc2 md: adding sdb2 ... md: sdb1 has different UUID to sdc2 md: created md1 md: bind md: bind md: running: raid1: raid set md1 active with 2 out of 2 mirrors md1: bitmap initialized from disk: read 8/8 pages, set 0 bits, status: 0 created bitmap (120 pages) for device md1 md: considering sdc1 ... md: adding sdc1 ... md: adding sdb1 ... md: created md0 md: bind md: bind md: running: raid1: raid set md0 active with 2 out of 2 mirrors md0: bitmap initialized from disk: read 1/1 pages, set 0 bits, status: 0 created bitmap (8 pages) for device md0 md: ... autorun DONE. ReiserFS: md3: found reiserfs format "3.6" with standard journal ReiserFS: md3: using ordered data mode ReiserFS: md3: journal params: device md3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: md3: checking transaction log (md3) ReiserFS: md3: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 368k freed cx2388x alsa driver version 0.0.6 loaded ACPI: PCI Interrupt 0000:00:0d.1[A] -> GSI 18 (level, low) -> IRQ 18 CORE cx88[0]: subsystem: 18ac:d500, board: DViCO FusionHDTV 5 Gold [card=31,autodetected] TV tuner 64 at 0x1fe, Radio tuner -1 at 0x1fe cx2388x v4l2 driver version 0.0.6 loaded cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded cx88[0]/1: CX88x/0: ALSA support for cx2388x boards ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 18 (level, low) -> IRQ 18 cx88[0]/0: found at 0000:00:0d.0, rev: 5, irq: 18, latency: 64, mmio: 0xfa000000 tuner 0-0043: chip found @ 0x86 (cx88[0]) tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 0-0061: chip found @ 0xc2 (cx88[0]) tuner 0-0061: type set to 64 (LG TDVS-H06xF) tuner 0-0061: type set to 64 (LG TDVS-H06xF) cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 cx88[0]/2: cx2388x 8802 Driver Manager ACPI: PCI Interrupt 0000:00:0d.2[A] -> GSI 18 (level, low) -> IRQ 18 cx88[0]/2: found at 0000:00:0d.2, rev: 5, irq: 18, latency: 64, mmio: 0xfc000000 ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:11.5 to 64 codec_read: codec 0 is not valid [0xfe0000] codec_read: codec 0 is not valid [0xfe0000] codec_read: codec 0 is not valid [0xfe0000] codec_read: codec 0 is not valid [0xfe0000] nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 1.0-9755 Mon Feb 26 23:16:31 PST 2007 cx2388x dvb driver version 0.0.6 loaded cx8802_register_driver() ->registering driver type=dvb access=shared CORE cx88[0]: subsystem: 18ac:d500, board: DViCO FusionHDTV 5 Gold [card=31] cx88[0]/2: cx2388x based dvb card DVB: registering new adapter (cx88[0]). DVB: registering frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)... ReiserFS: md2: found reiserfs format "3.6" with standard journal ReiserFS: md2: using ordered data mode ReiserFS: md2: journal params: device md2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: md2: checking transaction log (md2) ReiserFS: md2: Using r5 hash to sort names ReiserFS: sda2: found reiserfs format "3.6" with standard journal ReiserFS: sda2: using ordered data mode ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda2: checking transaction log (sda2) ReiserFS: sda2: Using r5 hash to sort names XFS mounting filesystem sda1 Ending clean XFS mount for filesystem: sda1 Adding 979832k swap on /dev/md1. Priority:-1 extents:1 across:979832k skge eth0: enabling interface ADDRCONF(NETDEV_UP): eth0: link is not ready skge eth0: Link is up at 1000 Mbps, full duplex, flow control both ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=345 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=325 Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=345 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=325 Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=354 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=334 Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=354 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=334 Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=397 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=377 Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=397 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=377 Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=425 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=405 Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=425 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=405 Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=411 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=391 Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=409 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=389 Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=413 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=393 Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=344 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=324 Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=353 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=333 Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=353 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=333 Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=410 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=390 Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=353 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=333 Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=412 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=392 agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode Machine check events logged lgdt330x: lgdt3303_read_snr: Modulation set to unsupported value lgdt330x: lgdt3303_read_snr: Modulation set to unsupported value KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value lgdt330x: lgdt3303_read_snr: Modulation set to unsupported value lgdt330x: lgdt3303_read_snr: Modulation set to unsupported value KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value lgdt330x: lgdt3303_read_snr: Modulation set to unsupported value lgdt330x: lgdt3303_read_snr: Modulation set to unsupported value KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value Machine check events logged Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=345 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=325 Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=345 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=325 Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=354 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=334 Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=354 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=334 Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=397 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=377 Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=397 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=377 Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=425 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=405 Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=425 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=405 Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=411 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=391 Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=409 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=389 Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=413 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=393 Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=344 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=324 Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=344 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=324 Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=353 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=333 Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=424 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=404 Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=353 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=333 Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=412 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=392