2008-02-04 17:41:00.328 PIDInfo(5): Closing filter for pid 0x21 2008-02-04 17:41:00.330 DVBSH(5): RemovePIDFilter(0x300) 2008-02-04 17:41:00.331 PIDInfo(5): Closing filter for pid 0x300 2008-02-04 17:41:00.333 DVBSH(5): RemovePIDFilter(0x441) 2008-02-04 17:41:00.335 PIDInfo(5): Closing filter for pid 0x441 2008-02-04 17:41:00.336 GetChannelData() failed because it could not find channel number '9490' in DB for source '2'. 2008-02-04 17:41:00.337 DVBSH(5): RemovePIDFilter(0x1522) 2008-02-04 17:41:00.339 ChannelBase(5): IsTunable(,9490) Failed to find channel in DB on input '3' 2008-02-04 17:41:00.342 PIDInfo(5): Closing filter for pid 0x1522 2008-02-04 17:41:00.346 DVBSH(5): RemovePIDFilter(0x1523) 2008-02-04 17:41:00.348 PIDInfo(5): Closing filter for pid 0x1523 2008-02-04 17:41:00.350 DVBSH(5): RemovePIDFilter(0x1525) 2008-02-04 17:41:00.351 PIDInfo(5): Closing filter for pid 0x1525 2008-02-04 17:41:00.357 GetChannelData() failed because it could not find channel number '9490' in DB for source '2'. 2008-02-04 17:41:00.359 ChannelBase(5): IsTunable(,9490) Failed to find channel in DB on input '3' 2008-02-04 17:41:00.371 GetChannelData() failed because it could not find channel number '9490' in DB for source '2'. 2008-02-04 17:41:00.372 ChannelBase(5): IsTunable(,9490) Failed to find channel in DB on input '3' 2008-02-04 17:41:00.388 GetChannelData() failed because it could not find channel number '9490' in DB for source '2'. 2008-02-04 17:41:00.389 ChannelBase(5): IsTunable(,9490) Failed to find channel in DB on input '3' 2008-02-04 17:41:00.403 GetChannelData() failed because it could not find channel number '9490' in DB for source '2'. 2008-02-04 17:41:00.404 ChannelBase(5): IsTunable(,9490) Failed to find channel in DB on input '3' 2008-02-04 17:41:00.416 GetChannelData() failed because it could not find channel number '9490' in DB for source '2'. 2008-02-04 17:41:00.418 ChannelBase(5): IsTunable(,9490) Failed to find channel in DB on input '3' 2008-02-04 17:41:00.429 GetChannelData() failed because it could not find channel number '9490' in DB for source '2'. 2008-02-04 17:41:00.431 ChannelBase(5): IsTunable(,9490) Failed to find channel in DB on input '3' 2008-02-04 17:41:00.443 GetChannelData() failed because it could not find channel number '9490' in DB for source '2'. 2008-02-04 17:41:00.444 ChannelBase(5): IsTunable(,9490) Failed to find channel in DB on input '3' 2008-02-04 17:41:00.458 GetChannelData() failed because it could not find channel number '9490' in DB for source '2'. 2008-02-04 17:41:00.459 ChannelBase(5): IsTunable(,9490) Failed to find channel in DB on input '3' 2008-02-04 17:41:00.473 GetChannelData() failed because it could not find channel number '9490' in DB for source '2'. 2008-02-04 17:41:00.474 ChannelBase(5): IsTunable(,9490) Failed to find channel in DB on input '3' 2008-02-04 17:41:00.489 GetChannelData() failed because it could not find channel number '9490' in DB for source '2'. 2008-02-04 17:41:00.491 ChannelBase(5): IsTunable(,9490) Failed to find channel in DB on input '3' 2008-02-04 17:41:00.505 GetChannelData() failed because it could not find channel number '9490' in DB for source '2'. 2008-02-04 17:41:00.507 ChannelBase(5): IsTunable(,9490) Failed to find channel in DB on input '3' 2008-02-04 17:41:00.534 GetChannelData() failed because it could not find channel number '9490' in DB for source '2'. 2008-02-04 17:41:00.535 ChannelBase(5): IsTunable(,9490) Failed to find channel in DB on input '3' 2008-02-04 17:41:00.553 GetChannelData() failed because it could not find channel number '9490' in DB for source '2'. 2008-02-04 17:41:00.555 ChannelBase(5): IsTunable(,9490) Failed to find channel in DB on input '3' 2008-02-04 17:41:00.570 GetChannelData() failed because it could not find channel number '9490' in DB for source '2'. 2008-02-04 17:41:00.572 ChannelBase(5): IsTunable(,9490) Failed to find channel in DB on input '3' 2008-02-04 17:41:00.575 ChannelBase(5) Error: Setting start channel '9490' failed, and we failed to find any suitible channels on any input. 2008-02-04 17:41:00.583 ChannelBase(5): Failed to find channel(9490) on current input (DiSEqC v1.3 Input 1) of card (5). 2008-02-04 17:41:00.587 ChannelBase(5): Found channel(9490) on another input (DiSEqC v1.3 Input 5) of card (5). 2008-02-04 17:41:00.589 TVRec(5): HW Tuner: 5->5 2008-02-04 17:41:00.591 TVRec(5): ClearFlags(PENDINGACTIONS,) -> RunMainLoop,CancelNextRecording,RecorderRunning, 2008-02-04 17:41:00.593 TVRec(5): Waiting for recorder pause.. 2008-02-04 17:41:00.595 TVRec(5): SetFlags(WaitingForRecPause,) -> RunMainLoop,CancelNextRecording,WaitingForRecPause,RecorderRunning, 2008-02-04 17:41:06.290 TVRec(2): SetFlags(EITScannerRunning,) -> RunMainLoop,EITScannerRunning,RingBufferReady, 2008-02-04 17:41:06.321 TVRec(2): SetChannel(50071) -- begin 2008-02-04 17:41:06.322 Reschedule requested for id -1. 2008-02-04 17:41:06.323 TVRec(2): ClearFlags(RingBufferReady,) -> RunMainLoop,EITScannerRunning, 2008-02-04 17:41:06.376 TVRec(2): Request: Program(no) channel(50071) input() flags(EITScan,) 2008-02-04 17:41:06.383 TVRec(2): ClearFlags(PENDINGACTIONS,) -> RunMainLoop,EITScannerRunning, 2008-02-04 17:41:06.384 TVRec(2): No recorder yet, calling TuningFrequency 2008-02-04 17:41:06.386 DVBChan(2:3): Opening DVB channel 2008-02-04 17:41:06.388 DVBChan(2:3): SetChannelByString(50071): 2008-02-04 17:41:06.394 DVBChan(2:3): 12224000 qpsk a auto auto a a auto a r 2008-02-04 17:41:06.396 DVBChan(2:3): Old Params: 12224000 qpsk a auto auto a a auto a r DVBChan(2:3): New Params: 12224000 qpsk a auto auto a a auto a r 2008-02-04 17:41:06.398 DVBChan(2:3): Tune(): Frequency tuning successful. 2008-02-04 17:41:06.399 DVBChan(2:3): SetChannelByString(50071): Tuned to frequency. 2008-02-04 17:41:06.401 TVRec(2): Starting Signal Monitor 2008-02-04 17:41:06.402 TVRec(2): SetupSignalMonitor(1, 0) 2008-02-04 17:41:06.404 DVBChan(2:3): Opening DVB channel 2008-02-04 17:41:06.406 DVBSM(3): Can measure Signal Strength 2008-02-04 17:41:06.407 DVBSM(3): Can measure S/N 2008-02-04 17:41:06.409 DVBSM(3): Can measure Bit Error Rate 2008-02-04 17:41:06.411 DVBSM(3): Can count Uncorrected Blocks 2008-02-04 17:41:06.412 SM(3)::RemoveFlags: Seen() Match() Wait() 2008-02-04 17:41:06.414 DVBSM(3): DVBSignalMonitor::ctor initial flags Seen() Match() Wait(Sig,SNR,BER,UB,) 2008-02-04 17:41:06.415 TVRec(2): Signal monitor successfully created 2008-02-04 17:41:06.417 TVRec(2): Setting up table monitoring. 2008-02-04 17:41:06.429 Using profile 'Live TV' to record 2008-02-04 17:41:06.430 TVRec(2): DVB service_id 71 on net_id 256 tsid 1 2008-02-04 17:41:06.432 DTVSM(3)::SetDVBService(transport_id: 1, network_id: 256, service_id: 71): 2008-02-04 17:41:06.434 SM(3)::RemoveFlags: Seen(PMT,SDT,Crypt,) Match(PMT,SDT,Crypt,) Wait() 2008-02-04 17:41:06.435 SM(3)::AddFlags: Seen() Match() Wait(PMT,NIT,) 2008-02-04 17:41:06.437 SM(3)::AddFlags: Seen() Match() Wait(PMT,NIT,Pos,) 2008-02-04 17:41:06.438 TVRec(2): Successfully set up DVB table monitoring. 2008-02-04 17:41:06.440 SM(3)::Start: begin 2008-02-04 17:41:06.442 SM(3)::RemoveFlags: Seen() Match() Wait(Pos,) 2008-02-04 17:41:06.443 SM(3)::Start: end 2008-02-04 17:41:06.446 TVRec(2): SetFlags(SignalMonitorRunning,) -> RunMainLoop,SignalMonitorRunning,EITScannerRunning, 2008-02-04 17:41:06.447 TVRec(2): ClearFlags(WaitingForSignal,) -> RunMainLoop,SignalMonitorRunning,EITScannerRunning, 2008-02-04 17:41:06.449 TVRec(2): SetFlags(WaitingForSignal,) -> RunMainLoop,WaitingForSignal,SignalMonitorRunning,EITScannerRunning, 2008-02-04 17:41:06.445 DVBSM(3): UpdateValues -- Signal Locked 2008-02-04 17:41:06.450 TVRec(2): ClearFlags(NeedToStartRecorder,) -> RunMainLoop,WaitingForSignal,SignalMonitorRunning,EITScannerRunning, 2008-02-04 17:41:06.452 DVBSH(3): AddListener(0x8852b78) -- begin 2008-02-04 17:41:06.457 DVBSH(3): AddListener(0x8852b78) -- locked 2008-02-04 17:41:06.461 DVBSH(3): AddListener(0x8852b78) -- end 2008-02-04 17:41:06.468 DVBSH(3): RunTS(): begin 2008-02-04 17:41:06.470 DVBSH(3): AddPIDFilter(0x0) priority 2 2008-02-04 17:41:06.472 PIDInfo(3): Opening filter for pid 0x0 2008-02-04 17:41:06.474 DVBSH(3): AddPIDFilter(0x10) priority 2 2008-02-04 17:41:06.475 PIDInfo(3): Opening filter for pid 0x10 2008-02-04 17:41:06.478 DVBSH(3): AddPIDFilter(0x11) priority 2 2008-02-04 17:41:06.489 PIDInfo(3): Opening filter for pid 0x11 2008-02-04 17:41:06.489 DVBSH(4): AddPIDFilter(0x12) priority 2 2008-02-04 17:41:06.457 TVRec(2): SetChannel(50071) -- end 2008-02-04 17:41:06.491 DVBSH(3): AddPIDFilter(0x14) priority 2 2008-02-04 17:41:06.496 PIDInfo(4): Opening filter for pid 0x12 2008-02-04 17:41:06.596 PIDInfo(3): Opening filter for pid 0x14 2008-02-04 17:41:06.597 DVBSH(4): AddPIDFilter(0x300) priority 2 2008-02-04 17:41:06.602 PIDInfo(4): Opening filter for pid 0x300 2008-02-04 17:41:06.604 DVBSH(4): AddPIDFilter(0x441) priority 2 2008-02-04 17:41:06.606 PIDInfo(4): Opening filter for pid 0x441 2008-02-04 17:41:06.702 SM(3)::AddFlags: Seen(PAT,) Match() Wait() 2008-02-04 17:41:06.706 SM(3)::AddFlags: Seen() Match(PAT,) Wait() 2008-02-04 17:41:06.707 CreatePATSingleProgram()