id,summary,reporter,owner,description,type,status,priority,milestone,component,version,severity,resolution,keywords,cc,mlocked 1606,LiveTV failure until call SetChannelByString() by EIT scanner,f.lange@…,danielk,"Revision [9576] DVB system, based on Twinhan cab-CI After starting mythbackend and shortly after that mythfrontend, LiveTV will fail until another function has tuned to a channel with success (in the logs: EIT scanner has tuned to channel 13001). After this successful tuning LiveTV also is fine. Still there is no tune to the default channel but to channel 13001. The backend seems to fail to tune to the default channel (in the logs: channel 10) after start up and after request LiveTV by the frontend. ---- part of backend-log ----- 2006-03-31 11:00:06.231 TVRec(2): SetFlags(AskAllowRecording,) -> RunMainLoop,AskAllowRecording, 2006-03-31 11:00:06.231 TVRec(2): Request: Program(no) channel() input() flags(LiveTV,) 2006-03-31 11:00:06.231 TVRec(2): ClearFlags(PENDINGACTIONS,) -> RunMainLoop,AskAllowRecording, 2006-03-31 11:00:06.249 TVRec(2) Error: Start channel invalid, setting to '10' on input DVBInput instead. 2006-03-31 11:00:06.249 DVB#0 Opening DVB channel 2006-03-31 11:00:06.249 TVRec(2) Error: Failed to set channel to 10. ---- end ------ Channel 10 definitively exist in the database, later tuning to channel 10 (after EIT scanner has tuned to 13001) is successful Is something missing like 'DVB#0 SetChannelByString(xxxxx)' when starting LiveTV befor other processes have done a successful tune? Furthermore, TVRec(2): Request: Program(no) channel() input() flags(LiveTV,) seems to have no parameters set. I will set this to priority trivial as LiveTV is fine after tune by EIT (some minutes after backend startup) Log of mythbackend and mythfrontend -v channel,record,playback attached. ",defect,closed,trivial,unknown,dvb,,low,fixed,,,0