Opened 18 years ago
Closed 18 years ago
#1995 closed defect (fixed)
MythTV Doesn't Scan QAM64
Reported by: | Owned by: | danielk | |
---|---|---|---|
Priority: | minor | Milestone: | 0.20 |
Component: | mythtv | Version: | head |
Severity: | low | Keywords: | QAM SIPARSER |
Cc: | Ticket locked: | no |
Description
Just checked out the current version of MythTV from SVN. I know from experimentation that my cable is QAM64.
It runs a QAM256 scan fine. But when I choose QAM64 in mythtv-setup, I get the following errors(mythtv-setup -v siparser,record,channel > ~/QAM64)
2006-06-26 15:55:41.800 Using runtime prefix = /usr/local 2006-06-26 15:55:41.898 DPMS is not supported. 2006-06-26 15:55:41.933 New DB connection, total: 1 2006-06-26 15:55:41.941 Connected to database 'myth2' at host: localhost 2006-06-26 15:55:41.943 Total desktop dim: 800x600, with 1 screen[s]. 2006-06-26 15:55:41.947 Using screen 0, 800x600 at 0,0 2006-06-26 15:55:41.951 Current Schema Version: 1146 2006-06-26 15:55:41.965 Total desktop dim: 800x600, with 1 screen[s]. 2006-06-26 15:55:41.967 Using screen 0, 800x600 at 0,0 2006-06-26 15:55:41.968 Switching to square mode (blue) 2006-06-26 15:55:41.987 Using the Qt painter 2006-06-26 15:55:42.369 Joystick disabled. 2006-06-26 15:55:42.401 Loading from: /usr/local/share/mythtv/themes/default/base.xml 2006-06-26 15:55:46.000 New DB connection, total: 2 2006-06-26 15:55:46.001 Connected to database 'myth2' at host: localhost 2006-06-26 15:55:46.004 New DB connection, total: 3 2006-06-26 15:55:46.004 Connected to database 'myth2' at host: localhost 2006-06-26 15:55:46.007 New DB connection, total: 4 2006-06-26 15:55:46.008 Connected to database 'myth2' at host: localhost 2006-06-26 15:57:01.009 SWizScan: scan(): type(3) src(1) cardid(1) 2006-06-26 15:57:01.011 DVBChan(0): Opening DVB channel 2006-06-26 15:57:01.011 DVBChan(0): Using DVB card 0, with frontend 'Oren OR51132 VSB/QAM Frontend'. 2006-06-26 15:57:01.012 ChannelBase(1): Input #1: 'DVBInput' schan(101#1) sourceid(1) ccid(1) 2006-06-26 15:57:01.012 ChannelBase(1): Current Input #1: 'DVBInput' 2006-06-26 15:57:01.298 SM(0)::AddFlags: Seen() Match() Wait(Sig,SNR,BER,UB,) 2006-06-26 15:57:01.298 DVBSM(0)::constructor(): initial flags 0x7400000 2006-06-26 15:57:01.298 SIScan(0): Connecting up DTVSignalMonitor 2006-06-26 15:57:01.299 SM(0)::AddFlags: Seen() Match() Wait(MGT,VCT,NIT,SDT,) 2006-06-26 15:57:01.309 SWizScan: HandleTuneComplete() 2006-06-26 15:57:01.310 SWizScan: ScanTransports(atsc, qam64, uscable) 2006-06-26 15:57:01.310 SIScan(0): Looked up freq table (atsc, qam64, uscable) 2006-06-26 15:57:01.313 SIScan(0): Starting SIScanner 2006-06-26 15:57:01.314 SIScan(0): Stopping SIScanner 2006-06-26 15:57:01.317 DVBSM(0)::Stop: begin 2006-06-26 15:57:01.317 SM(0)::Stop: begin 2006-06-26 15:57:01.317 SM(0)::Stop: end 2006-06-26 15:57:01.317 DVBSM(0)::Stop: end 2006-06-26 15:57:01.318 SIScan(0): SIScanner Stopped 2006-06-26 15:57:01.318 DVBSM(0)::Stop: begin 2006-06-26 15:57:01.318 SM(0)::Stop: begin 2006-06-26 15:57:01.318 SM(0)::Stop: end 2006-06-26 15:57:01.318 DVBSM(0)::Stop: end 2006-06-26 15:57:01.318 SM(0)::Stop: begin 2006-06-26 15:57:01.318 SM(0)::Stop: end 2006-06-26 15:57:01.318 DVBChan(0): Closing DVB channel I do see a few channels in QAM256? But I also see the following errors: 2006-06-26 15:53:41.911 DVBChan(0) Error: Getting Frontend tuning parameters failed. eno: Operation not supported (95) 2006-06-26 15:53:41.916 New DB DataDirect connection 2006-06-26 15:53:41.918 Connected to database 'myth2' at host: localhost 2006-06-26 15:53:45.314 SIScan(0): Post insertion found PAT.. 2006-06-26 15:53:45.314 DVBChan(0) Error: Getting Frontend tuning parameters failed. eno: Operation not supported (95) 2006-06-26 15:53:48.641 SIScan(0): Post insertion found PAT.. 2006-06-26 15:53:48.641 DVBChan(0) Error: Getting Frontend tuning parameters failed. eno: Operation not supported (95) 2006-06-26 15:53:55.526 SIScan(0): Post insertion found PAT.. 2006-06-26 15:53:55.526 DVBChan(0) Error: Getting Frontend tuning parameters failed. eno: Operation not supported (95) 2006-06-26 15:54:10.686 SIScan(0): Post insertion found PAT.. 2006-06-26 15:54:10.686 DVBChan(0) Error: Getting Frontend tuning parameters failed. eno: Operation not supported (95) 2006-06-26 15:54:16.213 SIScan(0): Post insertion found PAT.. 2006-06-26 15:54:16.213 DVBChan(0) Error: Getting Frontend tuning parameters failed. eno: Operation not supported (95) 2006-06-26 15:54:17.561 SIScan(0): Post insertion found PAT.. 2006-06-26 15:54:17.562 DVBChan(0) Error: Getting Frontend tuning parameters failed. eno: Operation not supported (95) Let me know if there is anything I can provide. }}
Attachments (3)
Change History (11)
comment:1 Changed 18 years ago by
Owner: | changed from Isaac Richards to danielk |
---|
comment:2 Changed 18 years ago by
Resolution: | → invalid |
---|---|
Severity: | high → low |
Status: | new → closed |
Changed 18 years ago by
Attachment: | mthtvsetup.channelsiparser added |
---|
Log - Siparser et all. I added some debugging code to give you a idea what I see in the code
comment:3 Changed 18 years ago by
Resolution: | invalid |
---|---|
Status: | closed → reopened |
Attachments added. I can add a fuller channels.conf. This is comcast cable into a HD3000.
Changed 18 years ago by
Attachment: | channels.conf added |
---|
comment:4 Changed 18 years ago by
I uploaded the full channels.conf. Note that I have modified the version of DVBscan slightly so that if it is missing certain data (which comcast doesn't provide) it puts out that standard QAM channel number rather then a unique (but useless) channel number.
DTVscan also has interesting results becayse of the missing data:
channel = 18 Signal: 95 look for sync PAT found ckets PAT found ckets PAT found ckets PAT found ckets PAT found ckets PAT found ckets PAT found ckets Unable to recieve valid packets did find pat `ERROR vct item ptr null couldn't get channel info : :18.1 :18: 2:1
However, the QAM scan for QAM_64 never even starts scanning, so I don't think it's affected by this.
comment:5 Changed 18 years ago by
Severity: | low → medium |
---|
I also confirmed that the 0.19 build from atrpms behaves in the same way.
comment:6 Changed 18 years ago by
Severity: | medium → low |
---|
The frontend tuning paramaters error message doesn't mean anything with this card, it does not support this ioctl, but the MythTV scanner has a fallback for this.
I'm going to need you to attach the entire output from "mythtv-setup -v channel,siparser,record" and the output from the atsc scanner in dvbutils scanning with the same frequency table.
After you've attached those two logs please reopen the ticket.