cross recorder channel changes do not work

[orion@…]

here is my setup: PVR-500 #1: /dev/video1 connected to Svideo-1 and uses a digital channel listing from DataDirect PVR-500 #2: /dev/video2 connected to Tuner-2 and uses an analog channel listing from DataDirect PVR-250: /dev/video0 connected to Tuner and uses an analog channel listing from DataDirect

The analog "feed" is my cable companies basic service (channels 2-90), the digital feed is my cable companies digital offerings (channels 2-1000 or some such) with an external STB. I can switch to each individual card with "Y" and use them fine. However, when I am on an analog input (PVR-500 #1 or the PVR-250) and enter one of the digital channels then press select, MythTV does not change tuner cards to the digital, even though the digital tuner is not recording.

If I understood some of the ideas from changeset [8617], MythTV should automatically switch tuner cards and change to the appropriate channel.

I will attach the verbose output of what happens while watching LiveTV on an analog input and entering "320" (HBO, a digital channel).

[orion@…]

verbose output of channel change attempt

[orion@…]

It would seem that one of the SQL queries after 2006-12-04 00:51:58.240 should find the channel, yet they do not. Please note, while the "digital" tuner is selected as my current tuner, I can change to 320 without problems.

[orion@…]

My apologies for cluttering up trac. This was due to a misconfigured video source. Crap in - crap out. Please mark this as invalid.