id,summary,reporter,owner,description,type,status,priority,milestone,component,version,severity,resolution,keywords,cc,mlocked 7663,Unable to lock signal via uncommitted diseqc,Mike Nix ,Janne Grunau," I have the following setup: mythtv -> TT-Connect S2-3650 CI -> 8x1 uncommitted diseqc -> LNBs I was using a 2x1 ""super mini"" diseqc which worked fine under MythTV configured as either a mini diseqc, or a committed diseqc with 2 ports. With the new diseqc, scan-s2 works fine - it selects the correct LNB, tunes and finds the correct channels on the satellite. I patched szap-s2 for uncommitted diseqcs and that also locks the signal for each satellite ok. I configured MythTV for an uncommitted diseqc with 8 ports, but it does not seem to change the switch - I can get a lock on the satellite on the first port, but not any others. mythtv-setup -v channel,extra shows the correct diseqc command being sent - the same one being sent by szap-s2. (I'll attach the full log) 2009-11-26 09:34:39.702 DiSEqCDevTree: Changing LNB voltage to 18V 2009-11-26 09:34:40.203 DiSEqCDevTree: Resetting DiSEqC bus 2009-11-26 09:34:40.203 DiSEqCDevTree: Sending DiSEqC Command: e0 0 0 2009-11-26 09:34:40.983 DiSEqCDevTree: Changing to DiSEqC switch port 5/8 2009-11-26 09:34:40.983 DiSEqCDevTree: Sending DiSEqC Command: e0 10 39 f4 MythTV Version : 22906M MythTV Branch : trunk Network Protocol : 51 Library API : 0.23.20091122-1 QT Version : 4.5.3 Options compiled in: linux release using_oss using_alsa using_jack using_backend using_directfb using_dvb using_frontend using_hdhomerun using_hdpvr using_iptv using_ivtv using_joystick_menu using_lirc using_mheg using_opengl_video using_opengl_vsync using_qtwebkit using_v4l using_x11 using_xrandr using_xv using_xvmc using_xvmc_vld using_xvmcw using_bindings_perl using_bindings_python using_opengl using_vdpau using_ffmpeg_threads using_live using_mheg",defect,closed,minor,unknown,MythTV - DVB,head,medium,invalid,uncommitted diseqc,,0