id summary reporter owner description type status priority milestone component version severity resolution keywords cc mlocked 7676 Switching between DVB-S and DVB-T jode Isaac Richards "Hey, I have to say I really like MythTv 0.22. The new UI addition in particular is quite nice. I have one last issue I've been unable to get to the bottom of and it really has me stumped. I'm using a HVR-4000 card to receive DVB-T signals and DVB-S signals. My first problem was trying to get DVB-S tuning working. In order to get this working I had to use updated card firmware as detailed here: http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-4000#Firmware Secondly I couldn't get a DVB-T signal so I had to patch the v4l-dvb drivers. I have both this inputs set up in MythTv. They are set up in the same input group because DVB-T and DVB-S can not be used simulataneously on the HVR-4000. I also have 'Open card on demand' checked for both inputs. The first problem is that the EIT for DVB-T is not working. EIT for DVB-S is working fine. I used MythTV to scan for both sets of channels just providing the transponders. The second and more serious issue is that let's say I start watching a DVB-S station, switch to a DVB-T station then it all works wonderfully. If I then try to switch back to DVB-S again the frontend just hangs. I've confirmed this configuration to work with with Myth 0.21. Anyone any clues. I'm aware that this might be another issue with the card. Is there anyway to confirm this from the attached logs. J. " defect closed minor unknown MythTV - General unknown medium fixed 1