DVB only allowing single recording with 2 Avermedia tuners

[ian.cunningham@…]

I have 2 Avermedia tuners [volar-x & A16D] which have played nice up till v 0.27

I now, cannot get them to record simultaneously now regardless of how I try to even though they are both receiving correctly. Whatever I try I always show a conflict with one or the other even when I specify a different card for each recording, something myth took care of so well previously If any info apart from the dmessg below is required please email me & I will supply them thank you for your support

Relevant Dmesg showing how the cards load:

[   20.790853] Linux video capture interface: v2.00
[   20.807343] saa7130/34: v4l2 driver version 0, 2, 17 loaded
[   20.807468] saa7133[0]: found at 0000:07:01.0, rev: 209, irq: 17, latency: 64, mmio: 0xfbeff800
[   20.807473] saa7133[0]: subsystem: 1461:f936, board: AVerMedia Hybrid TV/Radio (A16D) [card=137,autodetected]
[   20.807486] saa7133[0]: board init: gpio is 22ca00
[   20.834001] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[   20.836111] snd_hda_intel 0000:00:1b.0: irq 68 for MSI/MSI-X
[   20.850642] SKU: Nid=0x1d sku_cfg=0x4015e601
[   20.850645] SKU: port_connectivity=0x1
[   20.850647] SKU: enable_pcbeep=0x1
[   20.850648] SKU: check_sum=0x00000005
[   20.850649] SKU: customization=0x000000e6
[   20.850651] SKU: external_amp=0x0
[   20.850652] SKU: platform_type=0x0
[   20.850653] SKU: swap=0x0
[   20.850654] SKU: override=0x1
[   20.851093] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   20.851096]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   20.851097]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   20.851099]    mono: mono_out=0x0
[   20.851100]    dig-out=0x11/0x1e
[   20.851101]    inputs:
[   20.851103]      Front Mic=0x19
[   20.851105]      Rear Mic=0x18
[   20.851106]      Line=0x1a
[   20.851108] realtek: No valid SSID, checking pincfg 0x4015e601 for NID 0x1d
[   20.851109] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0888
[   20.861198] Registered IR keymap rc-avermedia-a16d
[   20.861278] input: saa7134 IR (AVerMedia Hybrid TV as /devices/pci0000:00/0000:00:1e.0/0000:07:01.0/rc/rc0/input9
[   20.861331] rc0: saa7134 IR (AVerMedia Hybrid TV as /devices/pci0000:00/0000:00:1e.0/0000:07:01.0/rc/rc0
[   20.868002] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   20.868133] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   20.868282] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   20.868349] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   20.868415] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   20.868485] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   20.868550] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   20.868616] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   20.869028] hda_intel: Disabling MSI
[   20.869040] hda-intel 0000:03:00.1: Handle VGA-switcheroo audio client
[   21.013203] saa7133[0]: i2c eeprom 00: 61 14 36 f9 00 00 00 00 00 00 00 00 00 00 00 00
[   21.013214] saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff
[   21.013224] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 00 08 ff 00 0e ff ff ff ff
[   21.013233] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   21.013242] saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff ff ff ff ff ff ff
[   21.013250] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   21.013259] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   21.013268] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   21.013277] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   21.013286] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   21.013291] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   21.013296] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   21.013301] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   21.013306] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   21.013313] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   21.013318] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   21.021166] tuner 0-0061: Tuner -1 found with type(s) Radio TV.
[   21.023429] xc2028 0-0061: creating new instance
[   21.023432] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[   21.023792] saa7133[0]: registered device video0 [v4l2]
[   21.023827] saa7133[0]: registered device vbi0
[   21.023853] saa7133[0]: registered device radio0
[   21.026481] saa7134 ALSA driver for DMA sound loaded
[   21.026506] saa7133[0]/alsa: saa7133[0] at 0xfbeff800 irq 17 registered as card -2
[   21.030948] dvb_init() allocating 1 frontend
[   21.041132] xc2028 0-0061: attaching existing instance
[   21.041136] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[   21.041138] DVB: registering new adapter (saa7133[0])
[   21.041143] saa7134 0000:07:01.0: DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB-T)...
[   21.128298] type=1400 audit(1409359730.820:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=483 comm="apparmor_parser"
[   21.128304] type=1400 audit(1409359730.820:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=483 comm="apparmor_parser"
[   21.128308] type=1400 audit(1409359730.820:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=483 comm="apparmor_parser"
[   21.128316] type=1400 audit(1409359730.820:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=534 comm="apparmor_parser"
[   21.128322] type=1400 audit(1409359730.820:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=534 comm="apparmor_parser"
[   21.128326] type=1400 audit(1409359730.820:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=534 comm="apparmor_parser"
[   21.128695] type=1400 audit(1409359730.820:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=483 comm="apparmor_parser"
[   21.128699] type=1400 audit(1409359730.820:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=483 comm="apparmor_parser"
[   21.128725] type=1400 audit(1409359730.820:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=534 comm="apparmor_parser"
[   21.128729] type=1400 audit(1409359730.820:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=534 comm="apparmor_parser"
[   21.472695] xc2028 0-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[   21.491388] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
[   21.618511] usb 2-3: dvb_usb_v2: found a 'AVerMedia AVerTV DVB-T Volar X' in warm state
[   21.680987] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:07.0/0000:03:00.1/sound/card1/input21
[   21.681058] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:07.0/0000:03:00.1/sound/card1/input20
[   21.681123] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:07.0/0000:03:00.1/sound/card1/input19
[   21.681186] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:07.0/0000:03:00.1/sound/card1/input18
[   21.815910] usb 2-3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[   21.815943] DVB: registering new adapter (AVerMedia AVerTV DVB-T Volar X)
[   21.819257] i2c i2c-1: af9013: firmware version 4.95.0.0
[   21.822349] usb 2-3: DVB: registering adapter 1 frontend 0 (Afatech AF9013)...
[   21.824847] MXL5005S: Attached at address 0xc6
[   21.860972] Registered IR keymap rc-avermedia-m135a
[   21.861041] input: AVerMedia AVerTV DVB-T Volar X as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/rc/rc1/input22
[   21.861444] rc1: AVerMedia AVerTV DVB-T Volar X as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/rc/rc1
[   21.861449] usb 2-3: dvb_usb_v2: schedule remote query interval to 500 msecs
[   21.861452] usb 2-3: dvb_usb_v2: 'AVerMedia AVerTV DVB-T Volar X' successfully initialized and connected
[   21.861479] usbcore: registered new interface driver dvb_usb_af9015
[   22.075047] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[   22.515718] init: udev-fallback-graphics main process (787) terminated with status 1

[ian.cunningham@…]

myth database backup current settings

[dekarl]

Sorry for taking so long to get to this ticket. Is this still an issue?

It sounds like a configuration issue which can be handled better (and hopefully faster) in our troubleshooting forum at ​https://forum.mythtv.org/viewforum.php?f=36

Please verify that both cards are properly configured and connected to the same video source.

(fixed formatting of the dmesg while here)